原文:DY、DYP型多级离心油泵用于输送不含固体颗粒的石油产品,石油化工流程及其它化学工业产品,也可用于汽锅给水。被输送媒质温度规模:(T)=-45-+200℃性能规模流量(Q):8.4-350m3/h扬程(H):400-1560m DY、DYP型多级离心油泵是我厂在消化引进先进技术的基础上,自行开发的新产品,纯粹按目前世界上最强大的国家石油学会AP1610标准(第八版)设计制造。产品特点1.采用海内外最新高效水力模型,效率高,汽蚀性能好。2.振动噪音小,运行安全可靠。3.安装维修利便。4.配套齐备、可控性好。5.加工制造精密度高,主要承压件为锻造不锈钢或碳钢。泵结构简介1.DY型为卧式、单壳体、径向剖分式多级离心泵,吸进口、吐出口法兰均铅直向上,水平中心支撑;DYP型泵吸进口为水平、吐出口可水平也可铅直、底脚支撑。2.叶轮、平衡鼓、轴套等依次装在轴上,转子器件由两端轴承作径向支撑和轴向限位。3.轴向力由双平衡鼓平衡,残余轴向力由推力轴承承受。4.用穿杠把吸入段、中段、吐出段联接成一体。5.轴承采用滑动轴承,推力轴承为向心推力球轴承或米切尔推力轴承。6.轴承润滑油采用自润滑油(油环)或强力压制润滑油。7.静密封采用金属面密封,缠绕垫密封和"O"形密封圈密封。8.动密封为机械密封,冲洗体式格局有自循环冲洗、抽头冲洗及外冲洗三种体式格局。管道泵消防泵真空泵化工泵螺杆泵
"DY,DYP overview of multi-stage centrifugal pumps"是由中国隔膜泵网供给的水泵行业新闻,译文仅供参考。别的,中国隔膜泵网还供给相关产品搜索:隔膜泵型号、隔膜泵价格、隔膜泵技术、隔膜泵新闻、隔膜泵生产商等。
译文:DY,DYP-type multi-stage centrifugal pump for conveying solid particles of petroleum products,petrochemical processes and other chemical industrial products,also can be used for boiler feed water.Transmission fluid temperaturePneumatic and electric diaphragm pumps range is:(T)=-45-+200℃Performance range of flow(Q):8.4-350m3/h Head(H):400-1560m DY,DYP-type multi-stage centrifugal pump is our factory introduce advanced technology in the digest,based on self-developed new products,completely according to the American Petroleum Institute AP1610 standard(Eighth Edition)design and manufacturing.Features 1.Using hydraulic model at homeSlurry pumps and abroad the latest 你好gh efficiency,你好gh efficiency and good cavitation performance.2.Vibration noise,safe and reliable operation.3.Easy installation and maintenance.4.Supporting complete,controllable.5.Processing and manufacturing of 你好gh precision,the main pressure parts for the forging of stainless steelMulti-stage pumps or carbon steel.Pump Description 1.DY type is horizontal,single shell,radial split multistage pump,intake,the outlet flange are vertical upward,Sweage pumps&Sludge pumpshorizontal center support;DYP pump intake to the level of the outlet can be levels can be vertical,foot support.2.Impellers,balance drum,and so in turn mounted on the shaft sleeve,the rotor parts from both ends of the bearings for radial and axial spacing.3.Axial force balance by the double-drum balance,residual axial force by the thrust bearing.4.With the suction section ofOther pumpsthe wear bar,the middle of spit connected into one paragraph.5.Bearing sliding bearing,thrust bearing for the radial thrust ball bearings or thrust bearings Mitchell.6.Using self-lubricating bearing lubrication(oil ring)or forced lubrication.7.Static sealing metal face seals,wound pad seals and"O"ring seal.8.Dynamic seal mechanical seals,rinse methods are self-cleaning cycle,outside tap and rinse rinse three ways.
原文来源:
访客您好：如找上海碳钢离心泵厂，请来上海龙亚碳钢离心泵厂，如需选型报价则请致电O2l-61557O88 或拨 O21-6l557288。O(∩_∩)O~不管您买不买，反正我是会把碳钢离心泵的价格给您报来的 ~~~~(*^__^*) ~~~